DIY FLORAL RING

Create a stunning floral ring prop for $55.00 or less! This floral ring is good mainly as a photo prop. It floral ring could be made into a floral ring swing if you use a hoop style firewood rack (homedepot.com $29.97) instead of PEX tubes. All materials were purchased at michaels.com and homedepot.com.


Materials Needed:

(2) 3/8"x10' PEX tubes, (2) 3/8"x3/8" Coupling devices, 2.5 ft x1ft wood, flowers, greenery garland, scissors, zip ties or green yarn, hot glue gun, floral tape and gold spray paint and rope.

Step 1: Take PEX tubes and bend them together to create your ring. Use the coupling devices to hold the tubes in place.





Step 2: Spray paint your tubes gold (be sure to flip them over to get both sides painted well) Set them aside to dry.

Step 3: You will only decorate 1 of your rings. Take your greenery garland and cut it in half. Hot glue your garland to the lower part each side of ring 1, secure with zip ties or yarn.


I used floral tape, but yarn or zip ties would work better.

Step 4: Take your flowers and place them on your ring, secure with hot glue, than reinforce with zip ties or yarn. You should start at the 9 o'clock and 3 o'clock positions on your ring and work your way to the center (12 o'clock position)

Your set up should look like this:


Step 5: Zip tie your rings together (only at the top 12 o'clock position)

Step 6: Tie one end of a rope at the very top, you will need this rope for support, the flowers and garland are a little heavy for the PEX tubes. I used natural jute rope by ashland from michales.com for $5.99 (they usually have good coupons if you download the Michaels app to your phone, you can probably get that for 1/2 off.


Finished product:

This photo prop is PERFECT for children and maternity!


305 views1 comment

© 2018 By MonicaBlackshire